Single Burner Controls
Fireye provides a variety of flame safeguard controls, flame detection and burner control products to the Industrial Heating market place. Our Industrial Flame Monitor and MicroM families provide safe and reliable light off of packaged burners used industrial furnaces and ovens. Our FlameWorx II and MB600 families provide independent flame detection for up to 30 burners and an industrial application. Anywhere you are trying to safely control a flame, you will find a Fireye control.
- 2-line by 16-character LCD display, historical and diagnostic capabilities
- Multiple languages
- Selection of plug-in amplifiers for greater flexibility
- Compatible with infrared, UV, UV self-check, flame rod, and photo cell
- MODBUS communications
- Selectable purge time
- Supply voltage: 120 VAC or 230 VAC
Industrial series flame monitortm
The Flame-Monitor Series provides the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas and combination fuel burners. On a safety shutdown, the display module will advise the operator that the control is in "Lockout" and indicate the cause as well as the position in the operating sequence that it occurred.Interchangeable programmer and flame amplifier modules allow complete versatility in selecting control function. The Flame-Monitor control uses the same wiring base as the Fireye D-Series and C-Series Controls and is directly interchangeable with most models without rewiring.
- CUTSHEET
- Diagnostic LED indicator lights
- Selection of plug-in programmers and amplifiers for greater flexibility
- Compatible with UV, UV self-check, IR, flame rod, photo cell, and cad cell
- Remote reset capability
- Supply voltage: 120 VAC or 230 VAC
- Remote communications via MODBUS
- Remote display capability
- Backward compatibl
- µM INDUSTRIAL SERIES
The Fireye MicroM Flame Safeguard controls are compact, modular burner management systems designed to provide automatic ignition and continuous flame monitoring for commercial sized heating and process burners firing any type of fuel.The MicroM is designed to be backward compatible with existing M-Series controls. The MicroM, through the use of micro-controller technology, incorporates "smart" diagnostic LEDs, optional alphanumeric display (ED510), remote reset capability, and serial communications via MODBUS or E500 Communication Interface.
Features:
- Compatible with UV and UV self-checking scanners
- Two channel operation
- Two flame scanner inputs
- Two flame relay SPDT outputs
- Two 4-20 mA analog outputs
- Two opto-isolated DC outputs
- Selectable FFRT
- Diagnostic LEDs
- Optional test jacks
- Optional communications
- Supply voltage: 24 VDC or 24 VAC
Flameworx iitm
The FlameWorx II modules provide accurate, reliable flame on/flame off indication utilizing ultra-violet or self-checking ultra-violet flame scanners.Each FlameWorx II module provides two (2) independent flame switches. Each flame switch provides its own SPDT flame relay, as well as on opto-isolated DC output. A series of LEDs on the FlameWorx II modules provide indication of system status (power on), flame relay status, and fault indication.
- CUTSHEET
Self-contained
- UV detection or flame rod or both
- Small footprint
- Analog test jacks for flame indication
- User controlled Flame Fail LED
- Self-check scanner available
- Remote testing of contacts available
pf series
The Fireye MBPF-100S and MB600PF provide visual indication and relay output that signal the user regarding flame presence in a combustion chamber.Unique to the module is its ability to use UV or flame rod or both simultaneously.The modules use an inexpensive socket for mounting.
Intouch
The inTouch Wireless Monitoring System was developed to communicate directly with up to ten (10) Flame-Monitor or MicroM flame safeguard controls. In the event of a lockout the information is transmitted to you through the nationwide cellular network, AMPS (Advanced Mobile Phone System), eliminating the need for costly telephone lines. And because inTouch is a cellular device, installation time is greatly reduced.
- MORE
boilerworx software
Designed to enhance the operation of the E340 boiler control, the new Fireye BoilerWorx software presents graphically superior information about the functions of you boiler. The software presents REAL TIME information from up to six E340 controls simultaneously. Visually and graphically BoilerWorx brings your boiler room to life. Information can be accessed either remotely or locally using a Windows 95 operating system.
- CUTSHEET
- CUTSHEET
- 2-line by 16-character LCD display, historical and diagnostic capabilities
- Multiple languages
- Selection of plug-in amplifiers for greater flexibility
- Compatible with infrared, UV, UV self-check, flame rod, and photo cell
- MODBUS communications
- Selectable purge time
- Supply voltage: 120 VAC or 230 VAC
-
Industrial series flame monitortm
The Flame-Monitor Series provides the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas and combination fuel burners. On a safety shutdown, the display module will advise the operator that the control is in "Lockout" and indicate the cause as well as the position in the operating sequence that it occurred.Interchangeable programmer and flame amplifier modules allow complete versatility in selecting control function. The Flame-Monitor control uses the same wiring base as the Fireye D-Series and C-Series Controls and is directly interchangeable with most models without rewiring.
- CUTSHEET
- Diagnostic LED indicator lights
- Selection of plug-in programmers and amplifiers for greater flexibility
- Compatible with UV, UV self-check, IR, flame rod, photo cell, and cad cell
- Remote reset capability
- Supply voltage: 120 VAC or 230 VAC
- Remote communications via MODBUS
- Remote display capability
- Backward compatibl
- µM INDUSTRIAL SERIES The Fireye MicroM Flame Safeguard controls are compact, modular burner management systems designed to provide automatic ignition and continuous flame monitoring for commercial sized heating and process burners firing any type of fuel.The MicroM is designed to be backward compatible with existing M-Series controls. The MicroM, through the use of micro-controller technology, incorporates "smart" diagnostic LEDs, optional alphanumeric display (ED510), remote reset capability, and serial communications via MODBUS or E500 Communication Interface.
- Compatible with UV and UV self-checking scanners
- Two channel operation
- Two flame scanner inputs
- Two flame relay SPDT outputs
- Two 4-20 mA analog outputs
- Two opto-isolated DC outputs
- Selectable FFRT
- Diagnostic LEDs
- Optional test jacks
- Optional communications
- Supply voltage: 24 VDC or 24 VAC Flameworx iitm
- CUTSHEET
- UV detection or flame rod or both
- Small footprint
- Analog test jacks for flame indication
- User controlled Flame Fail LED
- Self-check scanner available
- Remote testing of contacts available pf series
- MORE
- CUTSHEET
- CUTSHEET
Features:
The FlameWorx II modules provide accurate, reliable flame on/flame off indication utilizing ultra-violet or self-checking ultra-violet flame scanners.Each FlameWorx II module provides two (2) independent flame switches. Each flame switch provides its own SPDT flame relay, as well as on opto-isolated DC output. A series of LEDs on the FlameWorx II modules provide indication of system status (power on), flame relay status, and fault indication.
Self-contained
The Fireye MBPF-100S and MB600PF provide visual indication and relay output that signal the user regarding flame presence in a combustion chamber.Unique to the module is its ability to use UV or flame rod or both simultaneously.The modules use an inexpensive socket for mounting.
Intouch
The inTouch Wireless Monitoring System was developed to communicate directly with up to ten (10) Flame-Monitor or MicroM flame safeguard controls. In the event of a lockout the information is transmitted to you through the nationwide cellular network, AMPS (Advanced Mobile Phone System), eliminating the need for costly telephone lines. And because inTouch is a cellular device, installation time is greatly reduced.
boilerworx software
Designed to enhance the operation of the E340 boiler control, the new Fireye BoilerWorx software presents graphically superior information about the functions of you boiler. The software presents REAL TIME information from up to six E340 controls simultaneously. Visually and graphically BoilerWorx brings your boiler room to life. Information can be accessed either remotely or locally using a Windows 95 operating system.
